#Profibus_DP
;
; Control Concepts Profibus uses the UNIGATE IC
; This GSD-File must be used for all UNIGATE (module and IC) with Ident-Nr.3218H 
; and Firmware V6.0 and higher.
; These Units support DPV0, DPV1 and Publisher-Support of DPV2
;
; History:
; =========
; V0.2 22.12.2014 First Test Release Fusion Version (82, 9)
; V0.3 29.12.2014 Added modules for the Connect (121, 12)
; V0.4 22.01.2015 Removed unused modules; Renamed remaining modules
; V0.5 12.03.2015 Added line continuation on line 111
; V0.6 12.03.2015 shortened line 113, Changed Max to 1 module
; V0.7 13.03.2015 shortened string descr on line 114
; V0.8 08.04.2015 Added Module ID numbers
;
;
GSD_Revision        = 3
;GSD_Revision        = 5
;Ident_Maintenance_supp  = 1
;
Vendor_Name         = "Control Concepts Inc"
Model_Name          = "Connect/Fusion"
Revision            = "V0.8"
Ident_Number        = 0x3218
Protocol_Ident      = 0
Station_Type        = 0
FMS_supp            = 0
Hardware_Release    = "Revision H"
Software_Release    = "V6.0"
OrderNumber	    = "V3218"
;
9.6_supp            = 1
19.2_supp           = 1
45.45_supp          = 1
93.75_supp          = 1
187.5_supp          = 1
500_supp            = 1
1.5M_supp           = 1
3M_supp             = 1
6M_supp             = 1
12M_supp            = 1
;
MaxTsdr_9.6         = 15
MaxTsdr_19.2        = 15
MaxTsdr_45.45       = 15
MaxTsdr_93.75       = 15
MaxTsdr_187.5       = 15
MaxTsdr_500         = 15
MaxTsdr_1.5M        = 20
MaxTsdr_3M          = 35
MaxTsdr_6M          = 50
MaxTsdr_12M         = 95
;
Redundancy          = 0
Repeater_Ctrl_Sig   = 2
24V_Pins            = 0
Implementation_Type = "VPC3+B"
Bitmap_Device	    = "DAGW"
;
Freeze_Mode_supp    = 1
Sync_Mode_supp      = 1
Auto_Baud_supp      = 1
Set_Slave_Add_supp  = 1
Min_Slave_Intervall = 1
Publisher_supp      = 1	;data transfer to other salves possible (DPV2-publisher)
;
Modular_Station     = 1
Max_Module          = 1
Max_Input_Len       = 244
Max_Output_Len      = 244
Max_Data_Len        = 488
Modul_Offset        = 0
;
Fail_Safe           = 0
Slave_Family        = 9
Max_Diag_Data_Len   = 11
;
DPV1_Slave          = 1

C1_Read_Write_supp     = 1
C1_Max_Data_Len        = 80	;excluding function_num, slot_number, index, length
C1_Response_Timeout    = 300

Max_Initiate_PDU_Length = 52
C2_Read_Write_supp     = 1
C2_Max_Data_Len        = 80	;excluding function_num, slot_number, index, length
C2_Response_Timeout    = 300
C2_Read_Write_required = 1
C2_Max_Count_Channels  = 2
;
DPV1_Data_Types        = 0
;
Max_User_Prm_Data_Len      = 237	;depending from used Hardware (9..237)
;
PrmText=1
Text(0)="disabled"
Text(1)="enabled"
EndPrmText

ExtUserPrmData=1 "DPV1mode"
Bit(7) 0 0-1
Prm_Text_Ref=1
EndExtUserPrmData

Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00
Ext_User_Prm_Data_Ref(0)   = 1
;
; <Module-Definition-List>
; Module Selection 1
Module = "(Fusion) 82 Word In, 9 Word Out" 0xDF,0xDF,0xDF,0xDF,0xDF,0xD1,0xE8
1
EndModule
; Module Selection 2
Module = "(Connect) 121 Wd In, 12 Wd Out" 0xDF,0xDF,0xDF,0xDF,0xDF,0xDF,0xDF,0xD8,0xEB
2
EndModule
;